ProtoFPV PROTO5 Cinematic Racer 2 Frame Kit Rosso RED TPU.
For DJI O4 Pro FPV System.
Introducing the P5CR2, the bold evolution of the iconic P5CR. Crafted with T700 carbon fiber trellises and striking burnt blue titanium accents, this 5" quadcopter blends high-speed performance with the sleek, exotic allure of Italian race car design. Engineered for adrenaline-fueled cinematic flights and agile freestyle maneuvers, the P5CR2 delivers unmatched finesse at blistering speeds, with an ultralight build that ensures no props in view.
Featuring four versatile action cam mounting zones, four electronic mounting zones, and four LiPo battery positions, the P5CR2 offers endless customization to suit your vision. Build it your way and experience the sexiest, lightest, and most versatile 5" FPV quadcopter ever created. Every 5" enthusiast deserves to feel the thrill of this frame.
A heartfelt thank you to the hundreds of pilots worldwide soaring with the P5CR.
~PattyFlipz
Highlights:
1) New 3mm thick carbon fiber front cage for DJI O4 Pro or DJI O3/Universal 19mm ~ 20mm cameras. Up to 45 degree angle. Vibration / Jello reducing TPU60A PRO camera inserts included.
2) Squashed X geometry with no props in view
3) Exotic 1 piece Toray T700 matte carbon fiber base plate
4) Revised geometry for an ultra rigid high performing frame
5) All plates are completely milled out for maximum weight reduction
6) 30+ burnt blue Titanium screws included for maximum weight reduction & performance
7) 4 convenient mounting zones for action cameras
8) Lighter than your typical 5" tank by 50 ~ 100 grams!
9) x1 WS2812 programmable LED light included
10) Battery can be mounted on the top, toilet tank top or bottom, or bottom mounted with up to 3 straps for some 5" racing or long range action.
11) Maximum flexibility: 4 zones to mount your electronics!
12) 17 pieces of TPU included for a complete package
13) TPU feet now feature channels to slip through a thin led light strip
Compatibility Notice:
Frame pieces and TPU are not cross-compatible between P5CR and P5CR2. However, the good news for legacy P5CR pilots, all your electronic components should swap right over with no issues!
-
SPECS
Top plate: 2.5mm
Base plate: 5mm
Camera Cage: 3mm
Electronics Mounting:
Base Plate Front: M2 20x20, M2 25.5x25.5, M3 30.5x30.5
Base Plate Rear: M2 20x20, M2 25.5x25.5, M3 30.5x30.5
Top Front: M2 20x20 M2 25.5x25.5
Top Plate Rear: M2 20x20 M2 25.5x25.5
Maximum Stack Size: 40x40
Motor Mount: 16x16
Max prop size: 5.1"
Action Camera / Accessories Mounting:
Top Plate (front/back secured using supplied M3 thin nut)
Rear Plate (front/back secured using supplied M3 thin nut)
Battery Strap Mounting: 1) Top mount 2) Top Toilet Tank 3) Undermount 4) Bottom Toilet Tank
Recommended Camera Mounting Size: 19mm ~ 20mm (Variable)
Stand off height: 22mm
Interior height: 24.5mm
Stand off width: 33mm
Antenna mounting size: 3~4mm Post
Frame weight: 98.8g (no TPU)
Build weight potential: 300g ~ 350g (no lipo)
Top Speed: 180kph+
-
INCLUDES
T700 Carbon Fiber Plates
x1 Top plate
x1 Base plate
x1 Camera cage set L&R
3D Prints
x1 Proto Strap M(4s to 6s batteries 1100mah to 1550mah
x1 Single Antenna Mount
x1 Dual Antenna Mount
x1 TPU60A Camera Cage Inserts (2 pc)
x1 Light Bar
x1 Action Camera Mount
x1 Feet Set (4 pc)
x1 Shark Fin
x1 M10 GPS universal holder
x1 Universal RX Antenna holder (2 pc)
Hardware
x1 TesseGrip (sticky customizable lipo pad) x1 Titanium M5 x 20 (ACM)
x1 Aluminum M5 nut (ACM)
x1 Titanium M3 x 5 (ACM zone)
x16 Titanium M3 x 9 (Motors & Cage)
x8 Titanium M3x10 (Frame)
x4 Titanium M3 x 21 (FC / Stack)
x5 M3x1.8 thin nut (Stack or ACM nut)
x6 M3x22 Stand offs (frame / cage)
x4 M2 washer (camera)
x12 m2x2 nylon nut (AIO or VTX)
x8 M2 x 6 (Camera / VTX)
x4 Titanium M2x18 stack screw (AIO / Mini stack)
x4 M3x2 nylon nut (Stack or Spacer)
x4 M2x5 nylon Stand off (VTX Spacer)
x1 Single LED WS2812
x1 Spare 30AWG wiring
x2 Zip Tie -
DOWNLOADS
3D Print STL Files (Not for commercial use)
ESC settings Bluejay 8 bit or AM32 bit: pwm 24khz or 48khz. Everything else default
*Reverse Prop Direction Recommended!
WARNING: PID and filter tune was tested only with the recommended parts list provided. The tune may not be suitable for your build and may cause fly aways upon arming! Check over all components, solder connections, and settings before your first flight, always do a test arm and low hover (less than 1 meter off the floor) to ensure no fly aways occur. We are not responsible for the loss or damage of your quad!
-
-
