PROTO5 Cinematic Racer Frame Kit (NEON)

Regular price $149.99

Shipping calculated at checkout.

PROTO5 Cinematic Racer Frame Kit (NEON).

COLOR: NEON

Introducing PROTO5, a harmonious blend of T700 carbon fiber trellises and burnt blue titanium accents. Envisioned as a high-speed cinematic 5" quad, it channels the adrenaline of F1 racing complemented by the allure of exotic Italian race car styling. This ultralight and stylish package ensures no props in view. The P5 is engineered for tearing through cinematic challenges in high-speed fashion, offering four solid action cam mounting zones to capture any angle your heart desires. Treat yourself to build the sexiest, lightest, most versatile 5" FPV quadcopter! Hope you enjoy it as much as I do.

~PattyFlipz

Features:

1) Squashed X geometry with no props in view

2) Exotic 1 piece Toray T700 plain weave matte carbon fiber base plate

3) Strong and stiff construction

4) Burnt blue titanium M3 screws for maximum weight reduction & performance

5) 4 convenient mounting zones for action cameras

6) Lighter than your typical 5" by more than 30~50 grams!

7) x2 WS2812 programmable LED lights included

8) O3 AU quick swap. Easily move or reinstall the O3 AU quickly

9) Designed to be universal - Analog, HD Zero, Walksnail, etc.

10) Battery can be top mounted or under mounted

11) Flexibility - 3 zones to mount your electronics

 

Proudly designed, 3D printed, and shipped from Vancouver, British Columbia, Canada 🍁

  • SPECS

    Top plate: 2mm

    Base plate: 5mm

    Electronics Mounting:

    Base Plate Front: M3 20x20, M2 25.5x25.5, M3 30x30

    Base Plate Rear: M2 20x20 M2 25.5x25.5

    Top Plate Rear: M2 20x20

    Maximum Stack Size: 40x40

    Motor Mount: 16x16

    Max prop size: 5.1"

    Action Camera / Accessories Mounting:

    Top Plate (front/back)

    Rear Plate (front/back use supplied m2 nylon nut as a spacer)

    Battery Strap Mounting: Top mount & Undermount

    Recommended Camera Mounting Size: 19mm ~ 20mm (Variable)

    Stand off height: 22mm

    Stand off width: 28mm

    Wheelbase: 171x132mm

    Antenna mounting size: 3~4mm Post

    Frame weight: 94.66g (no TPU)

    Build weight potential: 300g ~ 355g (no lipo)

    Top Speed: 170kph

    INCLUDES


    T700 Carbon Fiber Plates

    x1 Top plate

    x1 Base plate

    3D Prints

    x1 Antenna Mount

    x1 Camera Cage (2pc)

    x1 Dji 03 AU Holder (2 pc)

    x1 Top Light Bar

    x1 Base Light Bar

    x1 Action Camera Mount

    x1 Feet Set (4 pc)

    x1 Shark Fin

     

    Hardware

    x1 Tessegrip - super sticky customizable battery pad

    x4 M3x22 aluminum stand offs

    x2 M2x3 screws (accessory into top plate press nut)

    x8 M2x5 screws (camera mounting or O3 AU holder top mounted)

    x6 M2x6 screws (accessory into base plate press nut or O3 AU holder)

    x4 M2x22 screws (stack or vtx)

    x20 M3x9 Ti screws (frame & motors)

    x4 M3x21 Ti screws (stack)

    x1 M5x20 Ti screw (action cam bolt)

    x1 M5 aluminum nut (action cam nut)

    x4 M2x5 nylon spacers

    x8 M2x2 nylon nut (press into O3 AU holder slots, lower action cam mount spacer, or to secure AIO or VTX)

    x4 M3 thin nut (Secure M3x21 stack screws to base plate)

    x4 M3 nut (Additional spacer for stack)

    x5 Zip tie

    x2 30awg wire set (LED to FC)

     

    • DOWNLOADS

      Assembly Guide

      3D Print STL Files (Not for commercial use)

      PID & Filter Tune

      BL_Heli32 settings (32 bit)

      Blue Jay ESC settings (8bit): pwm 24 or 48khz. Everything else default

      *Reverse Prop Direction Recommended!

       

      WARNING: PID and filter tune was tested only with the recommended parts list provided. The tune may not be suitable for your build and may cause fly aways upon arming! Check over all components, solder connections, and settings before your first flight, always do a test arm and low hover (less than 1 meter off the floor) to ensure no fly aways occur. We are not responsible for the loss or damage of your quad!